Leak Detection
in Monument, CO

The most reliable non-invasive check: turn off all fixtures, water-using appliances, and the ice maker. Go to your water meter and watch the dial or digital display for 15 minutes. If it moves, water is flowing somewhere — almost certainly a leak. Beyond that, unexplained water bills, damp spots, water stains on ceilings or walls, musty odors, and warm floor patches are all signals worth investigating.

Leak detection cost in Monument depends on the type and suspected location of the leak. A visible fixture leak takes less time to identify than a slab or underground leak. Call (720) 255-9702 — describe what you're experiencing and we can give you a realistic range before you schedule.

A slab leak is a leak in plumbing pipes running beneath the concrete slab your home sits on. In Monument, corrosion in copper hot water lines under slabs is common — hot water accelerates pipe deterioration. The most distinctive signs: a warm spot on an otherwise cool floor, hearing running water when everything is off, consistently high water bills with no other explanation, and in later stages, damp flooring or cracks appearing near the foundation.

Detection involves systematically narrowing down where the water is coming from. We start with what's visible — fixtures, accessible pipe connections, under-sink areas — then move to isolating the system: shutting off sections to determine whether the leak is in supply or drain, using pressure testing on supply lines, or checking moisture patterns for concealed leaks. For slab or underground leaks, specialized acoustic or thermal methods may be used to pinpoint the location without opening the wrong wall.

Yes — and this is why early detection matters in Monument's climate specifically. A small drip inside a wall stays warm and moist enough to grow mold within 24–48 hours in humid conditions. Over months, it can rot framing, damage drywall throughout an entire wall section, ruin flooring, and create a mold remediation project on top of the plumbing repair. Finding it early — when it's still just a slight moisture stain — costs a fraction of what late discovery costs.

Leak detection and leak repair are separate services. Detection identifies the source, type, and location of the leak. Once we know exactly what we're dealing with, we explain the repair options — what access is needed, what material is involved, and realistic cost. You decide before work begins.

Yes. Suspected slab leaks are evaluated using pressure testing (to confirm the supply line is losing pressure), listening equipment (to locate the sound of water movement underground), and thermal assessment (to identify temperature variations indicating hot water line leaks). In Monument homes built on slab foundations, we have significant experience with both copper hot water line leaks and cold supply line leaks under concrete.

In Monument and El Paso County, the most common causes are: aging copper pipe that's corroded from the inside out (especially in homes built before 1980), freeze damage from Colorado's temperature swings affecting exposed or under-insulated pipes, high water pressure stressing connections and fittings, root intrusion on underground supply lines, and the mineral-heavy water common in the Front Range that accelerates corrosion inside pipes and at connection points.

Minimize water use to reduce how much water is running through the leak. Turn off water to the affected area if you can isolate it. Look for and document any visible moisture, staining, or wet spots — photos with timestamps help us understand how quickly the situation is changing. If the water bill is the only sign, check the meter every hour or two and note how much is being used.

The meter test is reliable and easy: close all valves and appliances, note the meter reading, wait 30–60 minutes without using any water, and re-check. Movement confirms a leak. For indoor checking: look under all sink cabinets (especially kitchen), inspect around the base of toilets, check near the water heater for any moisture, and look at ceiling areas below second-floor bathrooms. Beyond that, hidden leaks inside walls, under slabs, and underground generally require professional diagnosis.

It depends on the severity. A burst pipe, major flooding, rapid ceiling collapse, or leak near electrical systems is an emergency — shut off the main water supply and call (720) 255-9702 immediately. A slow hidden leak that you've noticed through a water bill or mild staining is urgent but not an emergency — it should be investigated promptly to prevent damage from escalating, but you have time to schedule a detection appointment.

In many cases, yes — diagnostic methods can narrow down the location significantly before any wall is opened. Pressure testing isolates which section of pipe is losing pressure. Acoustic detection can locate the sound of water movement. Moisture mapping identifies where water has migrated inside the wall. This allows us to make a targeted opening in the right location rather than opening the entire wall searching for the leak.